RMG insights
DHU and defect rate: two quality numbers, two different questions
Defects per hundred units and percentage defective are often used interchangeably. They answer different questions, and confusing them hides problems.
By the BunonBrain team · · 5 min read
Quality reports in garment factories usually carry one of two numbers: DHU or defect percentage. They are related, but they are not the same, and choosing the wrong one can make a deteriorating line look stable.
Defects per hundred units (DHU)
DHU = Total defects found ÷ Pieces inspected × 100
DHU counts every defect. A garment with three defects adds three. It tells you how much rework the line is generating.
Defect rate (percentage defective)
Defect % = Defective pieces ÷ Pieces inspected × 100
Defect rate counts garments, not defects. A garment with three defects counts once. It tells you how many pieces need to go back.
When they disagree
If DHU rises while the defect rate stays flat, the same number of garments are failing, but each one has more problems. That usually points to a single operation or machine producing repeated faults, which is worth investigating at once.
Make the data trustworthy first
- Record the line, operation and hour with each defect, so trends can be traced.
- Use one defect taxonomy across inspectors and shifts.
- Only count findings an inspector has confirmed. Automated detections are suggestions until reviewed.
BunonBrain calculates defect rates and DHU only from inspections an inspector has reviewed, using the factory's own defect categories.