Guides
Line balancing basics for sewing lines
Every sewing line runs at the speed of its slowest operation. A practical introduction to finding the bottleneck and spreading work more evenly.
By the BunonBrain team · · 7 min read
A sewing line is a chain of operations. However fast most operators work, output is capped by the operation that takes longest per piece. Line balancing is the practice of distributing work so that no single station holds the others back.
Key terms
| Term | Meaning |
|---|---|
| Takt time | Available time ÷ required output: how often a finished piece must leave the line to meet the target. |
| Pitch time | Total SMV of the garment ÷ number of operators: the ideal work content per operator. |
| Cycle time | Observed time an operator takes for their operation, from a time study. |
| Bottleneck | The station with the highest cycle time; it sets the line's real capacity. |
A simple balancing routine
- Time-study each operation on the line, with several cycles per operator.
- Compare each station's cycle time with the pitch time.
- Identify stations well above pitch time (bottlenecks) and well below (spare capacity).
- Move part of a bottleneck's work to a skilled operator nearby, add a helper, or split the operation.
- Re-measure after the change. Balancing is a cycle, not a one-off event.
Watch the bundles
Bundles piling up in front of a station are the most visible sign of a bottleneck; empty hands after it are the other. Work in progress between operations is a free, continuous balancing signal.
BunonBrain records time-study observations, identifies the bottleneck and produces a balancing proposal. The proposal is applied only after it has been approved.